The Murphy Renegade - An Open Cockpit Biplane Kit

Murphy Renegade

If your preference is for the classic or antique look, but you’d also like some modern performance numbers, then the Murphy Renegade model is ideal for you.

If you think you would enjoy following rivers in an open cockpit airplane and throwing yourself through an occasional loop or roll, the Renegade should be perfect. If you want a rugged biplane that goes together quickly, costs less than any other aerobatic biplane kit out there, and that has proven itself in the hands of hundreds of other builders, the Renegade is perfect. With a simple and conventional control system, a beefy aluminum fuselage and wing structure, a strong landing gear, and a leisurely 75-85 mph cruise, the Renegade line is the perfect compromise of fun, thrift, thrills, and safety.

Murphy Renegade

The Murphy Renegade can be purchased as plans only or in a quick build kit form. It features the Rotax 582 engine, and a smooth sided cowl. Weights for the Renegade Spirit run 420 to 520 pounds. Forward of the Spirit firewall there can be a Rotax 582 (65 hp.), or if you prefer four cycle, a Rotax 912 (80-100 hp.). The Spirit also features the nostalgic look of the rounded bump cowling that made antique aircraft like the Monocoupe famous. Depending on where you live, both versions of the Murphy Renegade might qualify for ultralight aircraft status.

The structure of the Murphy Renegade is a blend of old and new technology, it is a conventional strut and wire braced biplane of fabric covered all metal construction. Under the Poly-Fiber fabric you will find an aluminum truss fuselage that utilizes 6061-T6 aluminum tubing mated with a unique, custom designed extrusion. All fuselage members are blind-riveted with AVEX and stainless steel rivets. The larger diameter tubes provide a fuselage with very high strength and rigidity while maintaining light weight. A fuselage of equivalent strength and rigidity, but welded from 4130 steel would weigh more than twice as much. Because the structure is a blind riveted one, rather than welded, it is very easy for even an inexperienced person to check for structural integrity and make any necessary repairs. The use of square tubing wherever possible provides maximum contact between riveted parts as well as increasing bending strength.

All quick build kits feature assembled fuselage frames which are fabricated in precision jigs at the Murphy factory. If you opt for a quick build kit you do not need special jigs to build any Murphy design.

The tail assembly is wire braced for the strongest possible structure with minimum weight. Doublers and crush tubes are used at all wire attach points. The doublers are used to increase bearing surface while the crush tubes allow the correct tightening of bolts without over stressing the tube structure. The tail group is made of aluminum tubes and channels that have an exceptionally high strength to weight ratio. Assembly is a simple matter of laying out the materials over full scale drawings that are provided for all the flying surfaces.

The information and photos on this page have been used with the written consent of Murphy Aircraft Mfg. Any reproduction of text and/or photos, without the consent of Murphy Aircraft Mfg, is strictly prohibited.

Return From Murphy Renegade to Murphy Aircraft

Return To Kit Airplanes

Return To Homepage

footer for murphy renegade page